-
What are the main ingredients of fittydent Denture Adhesive?
-
Sodium Carboxymethylcellulose:
This ingredient derives from Cellulose. Cellulose is produced from trees or cotton wool. The supplier of the ingredient of fittydent adhesive is using Scandinavian fir and spruce exclusively for our ingredient as we insist on very high quality.
Polyvinylacetat (PVA):
PVA is completely inert, non allergic, does not affect the taste and can not be absorbed. Polyvinylacetate is a very common ingredient in chewing gums and registered as substance for chewing gum base in Europe as well as in the USA.
-
Can fittydent Denture Adhesive be used like other adhesives?
-
fittydent Denture Adhesive is a completely unique product, so users must learn how to use it properly. fittydent must be applied on a clean and completely dry denture. It has a higher viscosity than conventional adhesives because of its composition, so only a small amount is needed. One application in the morning will hold into the night. fittydent does not need to be applied as often as conventional adhesives since it is non water-soluble in water and will not wash out while eating and drinking.
-
Can a denture wearer who wears a soft lined denture use fittydent Denture Adhesive ?
-
An optimal bonding effect can only be achieved if fittydent Denture Adhesive is used with a hard and smooth base. Dentures with soft linings will reduce the bonding effect of fittydent Denture Adhesive.
-
How should fittydent Denture Adhesive be applied?
-
- Clean and dry your dentures thoroughly. fittydent can only develop its full adhesive power when the dentures are completely dry.
- Apply fittydent to your dentures by squeezing the tube slightly. Warm the tube in hand if it is cold to let the adhesive come out easily.
- Apply fittydent to your dentures in strips or series of dots, making sure that the adhesive is not too close to the edge of the denture.
- To avoid clogging, close tube tightly immediately after use. Please keep the nozzle of the tube always clean.
- Insert dentures into mouth and bite firmly.
- For best results wait 15 minutes before eating or drinking.
-
How much fittydent Denture Adhesive should be used?
-
It may take a few trials to see what amount of fittydent Adhesive is ideal. First begin by using a small amount. Increase as needed to achieve a long lasting bond.
Helpful Hints
- If at the end of the day the bonding effect has not lessened, simply leave dentures in the mouth overnight. Apply less adhesive next day.
- If you wish an even stronger bond, spread adhesive to create a thin and even layer over the entire contact area.
- For sensitive gums, a mild tingling or burning sensation may be felt occasionally. It will pass by quickly and is absolutely harmless. All ingredients of fittydent are used in food industry.
- Use fittydent cleansing tablets regularly to clean dentures effectively.
- Soft liners might reduce bonding effect.
- Store at room temperature.
- Consult your dentist regularly to ensure proper fitting dentures.
-
If fittydent Denture Adhesive is non water-soluble, how can the denture be removed?
-
fittydent consists of two main components:
The Polyvinylacetate is the adhesive. It works only on a dry surface. To keep the jaw dry, we use Carboxymethylcellulose (CMC). CMC works like a sponge – it absorbs saliva. If the sponge ”is filled” with saliva and no more saliva can be absorbed, the jaw becomes wet, the Polyvinylacetate loses contact with the jaw and the denture stays in place only by suction. The user can remove the dentures. All the residues of the adhesive will remain on the dentures. No adhesive is left on the gum. The residues of the adhesive can easily be removed by using fittydent cleansing tablets.
-
The fittydent Denture Adhesive is getting dry in the tube nozzle - why?
-
fittydent Denture Adhesive may get dry in the tube nozzle if the tube stays open for a longer period of time or it the tube is not closed tightly. To avoid this problem, always close the tube tightly right after use!
-
Can the denture be removed before the saturation point is reached?
-
Normally, there is no need to remove the denture since no food particles get trapped underneath. However, in specific cases - like accidents- the denture can be removed by little force. It will be a painless procedure and will cause no negative effects, but residues might be left on the gum. These residues are not harmful and will come off by themselves after a few hours.
Under no circumstances should denture cleansers or other removal methods be used to clean the gum.
-
What happens if the denture stays in the mouth longer than one day?
-
The denture can be cleaned with a toothbrush and a toothpaste, anytime after eating, just like natural teeth. Since fittydent Denture Adhesive provides perfect adhesion, no food particles can get trapped beneath the dentures. Therefore, the denture does not need to be removed for cleaning. If shorter bonding effect is desired, simply apply less adhesive.
-
Will fittydent Denture Adhesive work if the user has a problem with excessive saliva?
-
Yes, but an increased amount of fittydent Denture Adhesive should be used in this case. If the lower denture does not stay in place for one day, fittydent Denture Adhesive Cushions should be used instead. The fittydent Adhesive cushions were developed for denture wearers with excessive saliva and/or very narrow/flat lower jaw.
-
Will fittydent Denture Adhesive work if the denture wearer has a problem with dry mouth?
-
Yes. fittydent Denture Adhesive is a real adhesive which does not work by suction alone, so it is an effective solution for denture wearers with dry mouth.
-
Can fittydent Denture Adhesive cause allergic reactions?
-
All ingredients of fittydent denture adhesive are approved and used in food industry. fittydent Adhesive has been sold for more than 20 years all over the world. No major allergic reactions have occurred. But as the user can be allergic to any kind of food -even a tomato can cause allergic reactions -reactions can not completely be ruled out.
-
The user has sensitive gums, how can she/he reduce the tingling or burning feeling?
-
For sensitive gums, the adhesive should be spread with the finger in a thin and even layer over the entire contact area and left to dry for 30 seconds before inserting. The user should wait 15 minutes before eating or drinking.
-
What if users have a sticky feeling when using fittydent?
-
In this case, too much fittydent Denture Adhesive was applied on the denture. The user should not apply fittydent Denture Adhesive too close to the edge of the denture.
-
Can fittydent Denture Adhesive be used for partial dentures?
-
Yes. Partial dentures are fixed onto natural teeth with clamps. fittydent Denture Adhesive can be used so food does not get caught underneath the partial denture.
-
Have any studies on fittydent Denture Adhesive System’s effectiveness been conducted?
-
The fittydent Denture Adhesive System has been proven effective in clinical studies conducted in Europe, the United States and China. In all studies, fittydent was rated the best denture adhesive in the overall evaluation, and was overwhelmingly preferred by denture wearers. Test results confirm that fittydent Denture Adhesive System improves chewing ability and denture retention.
-
How long does fittydent Denture Adhesive stay fresh after purchase?
-
Its shelf life is 4 years. The user should be advised to close the tube tightly right after use.
-
How long will a 40 gram tube of fittydent Denture Adhesive last?
-
It depends on the size of the denture and the amount of adhesive which is spread over the denture. On average, a 40 gram (1,4 oz) tube of fittydent Denture Adhesive will last between 4 and 8 weeks.
-
The adhesive can hardly be squeezed out of the tube - why?
-
The consistency of fittydent Denture Adhesive is related to temperature. Users should be advised that fittydent Denture Adhesive must be kept at room temperature. If the tube is cold, it should be warmed in the hands for a short time before using.
